Automotive EVAP Smoke Machine Diagnostic Emissions Vacuum Leak Detector Tester

Description

Store category
Sign Up Now !
You may also like
Automotive EVAP Smoke Machine Diagnostic Emissions Vacuum Leak Detector Tester
Product Description
DHL/ FEDEX/EMS/ARAMEX Express Shipping !
Ancel S3000 100% Original Auto Car EVAP Smoke Machine Diagnostic Emissions Vacuum Leak Detector Tester
If you have our Ancel S3000 Smok detector , Much easier to find the leak with a smoke machine.The Smoke-Tek Blaster can be also be used to find other leaks, intake leaks, oil leaks, wind water and weatherstripping leaks; tractor & car cabs, EGR and exhaust systems, the list goes on. It is easily portable and compact and easy to use.   Don't spend your whole day wasted looking for bad hoses, using propane or starting fluid to try and locate the leak.
Don't hire a shop to use one of their smoke pro or leak tamer machines costing hundreds of dollars in the process. If you own an Ancel S3000 smoke detector of your own, you will save yourself more money and time. If you own a repair shop, it will bring you unimaginable benefits.
Techs, Dealerships ,independent garages all over use smoke machines to diagnose evap leaks; here are some of the codes you may encounter in a evap system.
P0440 Evaporative Emission Control System Fault
P0441 Evaporative Emission Control System Incorrect Purge Flow
P0442 EVAP Emission Control System Leak Detected (small leak)
P0455 EVAP Emission Control System Leak Detected (gross leak)
P0456 EVAP Emission Control System Leak Detected (small leak)
P0457 EVAP Emission Control System Leak Detected (fuel cap)
Ancel S3000 Product Features:
✦ Connects to your air compressor, we use a regulator that reduces the air pressure to 1-1.5 psi safe for evap.
✦ In line Fuse for protection.
✦ 5 ft Durable air hose.
✦ 5 ft battery cable clamps outdoor rated wire; all soldered.
✦ Tapered smoke tip to fit variety sets of hoses
✦ Simple easy to read instructions to get started easy as 1,2,3
✦ Connects to positive and negative battery to generate smoke, very handy tool!
✦ Easy to use hook up to car battery and compressor your in business.
✦ With the attached handle you can hang it or carry unit.
✦ Battery clips, and inline fuse are soldered.
✦ All units are electrically tested, to meet our strict quality requirements.
✦ Works on all car makes and models.
✦ Makes constant smoke, to find even the most stubborn leak.
✦ Made out of Sturdy metal, more durable and better looking than paint can units.
Ancel S3000  Car Smoke Leak Detector Features :
1.[Wide range of applications]
For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats etc machine.Works on all car makes and models.
2.[Powerful and easy to operate]
The Ancel S3000  has its own air pump, it does not rely on other air machine ,Connect the detector with DC12V battery,It can be outputs lots of Smoke within 30 seconds after turning on.
3.[Advanced technology]
It works on the EVAP system (we also have another version that specially designed for EVAP system).
4.[Overheat & Anti-frost protection]
The detector has smart protector. If it exceeds working limit,for e.g over 75℃. It will power off automatically.
Main Unit Structure :
Hook: To hang the detector when detecting.
Working Indicator: It is lit when the detector works
Power Switch: Power it on, and the detector works
Smoke Output Tube: The smoke outlet which connecting with detection port
Power Clamp: To connect with vehicle battery. The voltage is DC12V.
How to do leakage test？
1. Turn OFF the ignition of the vehicle.
LEAK TEST OF VEHICLE SYSTEMS REQUIRES THE ENGINE TO BE OFF
2.Dismantle the air filter and the throttle connections.
3.Clean the inner wall of the intake opening to avoid sharp objects and put the Universal Intake
Adapter into the opening
4.Connect the Power Cord to 12V vehicle battery.
5.Now the Power LED would be ON, if else check the power supply.
6.Introduce the smoke nozzle into the system via the Adapter Cone
7.Press Air Control Switch, wait for 30 seconds until the system is pressurized, and check the
Pressure Gauge & Flow Meter reading for leak status, if the unit is equipped with Pressure Gauge & Flow Meter
8.Press Smoke Control Switch, .unplug and Plug back the smoke nozzle back into the Cone Adapter when there’s obvious smoke coming out of the smoke nozzle
9.The system will be ready for leak check in 2 minutes. Use a bright light torch or working lamp to assist
10.After test, press Smoke Control Switch again to stop the unit from generating smoke and
press Air Control Switch to stop generating pressurized air
11.Collect the Smoke Hose and the Power Cord with the Velcro Straps for storage. Hang the unit or make it stand in UPRIGHT position only. Do NOT lay it down.
Caution
：
1.When you use this AUTOOL SDT 106 Car Smoke Leak Detector for the first time, fill with 20ml oil . Please be careful NOT to beyond this range.
2.The testing liquid : both liquid paraffin and baby oil are OK.
3.Fresh oil can be filled with only when the smoke gets thin, and it can’t be filled over 20ml each time.
4.Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.
5.During the process of leak detection, please keep away from smoke-sensitive parts.
6.Do NOT run the detector over 8 minutes continuously. It needs interval rest.
7.The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later.
8.The round part of this detector has temperature, please be careful to avoid burns.
9.If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.
Packing List :
1pc * Ancel S3000 Car Smoke Leak Detector Main Unit
1pc * Hook (with hand-tighten nuts)
1pc * Rubber Connect Parts
1sets * Hard Rubber Hose Plug (with serial specification)
1pc * Standard Cone Adapter
1pc * Power Cord Clamp
1pc * Valve Core Wrench
1pc * Test Oil Refill Bottle(oil not included)
1pc * EVAP Special Connector
1pc * Smoke Hose
1pc * User Manual
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
Paypal is only payment we accept .
Delivery details
1.
Shipping terms
: Int'l Express/ Registered Air mail
2.
After the payment cleared, your order will be sent out within 1 business days (not including holiday and weekend) by int'l
Express or registered air mail
3.Shipping address supplied by
Paypal
is acceptable.
4.
Delivery time varies from 3 to 7 business days.
Terms of sales
P
lease do not hesitate to leave us your positive feedback if you are happy with your shopping. if you are unsatisfied with your purchase, please do not leave us negative or neutral feedback before contac
ting us, we will resolve the trouble for you
.
About us
We are eager to be your professional parner of automobile diagnostic tool
.
We are the authorized the dirstributor
of
Ancel
,
Foxwell
,
Obdstar
,
Launch
,
Autel
, Nexas, Kzyee,  AUTOPHIX,
etc., and more brands will Join us in near future.
We support remote assistance by TeamViewer if you have any difficulty in software installation.
Contact us
Please feel free to contact us
via eBay message once you
have any question before
you giving us
negative
feedback or open case.
We will reply in 24 business hours.
Business time:
GMT8 (9:00-18:00)
from
Monday
to
Friday
.
Feedback