Lonsdor Key Tool KH100+ Chip Transponder Remote Progarmmer & 4 Remotes&Smart Key

Description

Product Description
LONSDOR KH100+ Remote Key Programmer
KH100+ Handheld device is the latest upgraded version from old KH100, it embraces all the functions that KH100 had, besides, it is far superior in below ways:
●4-pack remotes & smart key involved
●Handy chip holder integrated
●902MHZ supported
●Longer distance data collection
●More accuracy frequency detection
●More user friendly
●Faster running
●Larger memory
●Optimized power system(faster charge &heat protection)
●Upgraded packaging
Lonsdor KH100+ Highlishts:
1.Modern appearance design, in line with the operating habits of the public.
2.Device system comes with operation instructions, easier for you to use.
3.It covers almost all the functions of the similar products in the market.
4.Built-in super sensor to collect data(over-range data collection).
5.
Exclusive support for 8A(H chip) generation.
6.Built-in WIFI module, can connect to network at any time
7.
4-pack remotes & smart key involved
8.Handy chip holder integrated,902MHZ supported
9.For
Toyota 8A Smart Key Direct copy to Add key(Latest Update)
Lonsdor KH100+ Functions:
When complete the registration activation, it enters below menu interface:
Identify Copy
Enter this menu, follow system prompts to operate (as shown).
Access card cloning
Enter this menu, you can identify and copy IC card, and generate garage key as well. Follow the prompts to operate(as shown below).
Simulate Chip
Put KH100+'s antenna at the ignition switch(as shown), choose the corresponding chip type to simulate.
This device supports below chip types: ①4D ②46 ③48 ④47
Generate Chip
Put below types of chip into the induction slot(as shown), choose the corresponding chip to operate according to the prompts.
This device supports below chip types: ①4D ②46 ③48 ④T5 ⑤7935 ⑥8A ⑦4C ⑧Chip conversion
Note: some chip data will be covered and locked.
Generate Remote
Enter [Generate key]->[Generate remote], choose the corresponding vehicle type to generate remote control(as shown) according to different regions.
Generate Smart key(card):
Enter [Generate key]->[Generate smart key] menu, choose the corresponding vehicle type to generate smart key/card(as shown) according to different regions.
Identify Coil:
①Search smart induction area Connect remote key with remote connector, Put KH100+'s antenna close to the pre-determined position. If inductive signal is identified, the device will continuously make sounds, please check if the position is right(as shown below).
②Detect IMMO Connect remote key with remote connector, Put KH100+'s antenna close to key identification coil, and use key to turn ignition ON. When KH100+ buzzer beeps, it means signal is detected.
Remote Frequency
Enter this menu, put remote control at the device’s induction area to detect remote frequency.
Special function:
Include: detect infrared signal, unlock For Toyota smart key, FT for Toyota smart key, Charge key, More functions, to be continued...
①Detect infrared signal
Put remote control at the infrared signal detection area, press the remote's button once. When the light on KH100+'s screen is on, it indicates there is infrared signal, otherwise there is no signal(see below pic).
②FT smart key
For Toyota or Lexus smart keys from Lonsdor, you can perform the following functional operations: read version info, modify key value, unlock and upgrade program and etc. Put in the smart key, click [select] to operate.
③Unlock For Toyota smart key/detect for Toyota key status
Put in the smart key, click OK to operate.
④Charge key
For a chargeable key with battery, you can perform this function. Put in the key, click [OK] to operate.
How to register Lonsdor KH100:
Note:
After booting the device, please connect  to WIFI  and enter the following process.
For New user:
1) For the first use, please prepare a common call phone or email to help complete activation process, click OK to start.
2)  Boot the device and enter registration activation process.
3)  Input user name, password. Confirm password, cellphone number or email to obtain verification code. Then input the code to submit registration.
4)  Account registered successfully, it will take 5 seconds to bind the device.
5) Successful registration, enter the system.
For Registered user(who has registered Lonsdor products before)
1) For the first use, please prepare a registered call phone or email to help complete activation process, click OK to start.
2)  Boot the device and enter registration activation process.
3)  Input your registered mobile number or email, password to obtain verification code. Then input the code to submit login.
4) Account login succeeded, it will take 5 seconds to bind the device.
5) Successful registration, enter the system.
In addition, users who have already registered Lonsdor's product can directly choose [registered user] to activate account.
How to update Lonsdor HK100:
Enter settings menu
Connect the device to network
Then choose [check for updates]
One-click for online update!
Lonsdor KH100+ Device components:
Product parameter
Device dimension: 193MM*88MM*24MM
Screen size: 2.8 inch
Screen resolution：320X240
Battery: 3.7V 2000MAH
Power: 5V 1A
Work temperature: -5℃~60℃
USB: USB-B/charge-data transfer
Connector port: PS/2 +1.25mm spacing, 6PIN terminal
Package includes:
1pc x LONSDOR KH100+ Latest handheld device
About Us
Payment
Shipping
Returns
Contact Us
We has been an
eBay Professional Diagnostic Programmer Seller
for 7 Years.
We are a
Professional Worldwide company.
We are a
Official Authorized dealer
of
Foxwell,
Xhorse,XTOOL,Launch,OBDSTAR,Autel,CGDI,Yanhua,Xtuner,Creater,2M2...
1.
PayPal
is the online payment method we accept.
Credit card (Visa, Eurocard/MasterCard, Amex, and Switch or Visa/Delta)
payment can be
ALSO
accepted through PayPal (You don't need a PayPal account)!
2. We will send item to your
Confirmed Shipping Address in Paypal
. If you would like to post to other address,please timely leave us a note when making payment through Paypal.We will NOT be responsible for any delivery failure due to unclear, unconfirmed or incomplete addresses given.
3. Please
make payment within 7 days after biding
, or all non-pay bidders will result in a non-paymemt buyer alert from Ebay and
unpaid transaction case will be opend by eBay
.
1.Orders will be
shipped out
within 1 business days
after the payment is received(except weekends and holidays).
2. Item will be
shipped by USPS/Fedex
to
your Confirmed shipping address in Paypal
.
If you would like to post to other address , please timely leave us a note when making payment through Paypal. We will NOT be responsible for any delivery failure due to unclear, unconfirmed or incomplete addresses given.
1. If you are not satisfied with the item you received, pls
return it
within 30 days
for a replacement or money back. please contact us via eBay message at the first time to
get Return Address
instead of sending back directly without permission.
2. If the item you received has quality problem, You can get full refund or exchange a new good item.
If you order a wrong item from us, you can also
return the wrong item to get refund, or exchange a right item
, but the extra shipping cost is your responsibility.
3.
All returned items must be in the
Original Package
and please
Provide the shipping tracking number
, specific reason for the return.
1.
If you have any questions,please contact us
by eBay messages.
Please choose
“ Other”
when
the item you receive is unexpected defective or you did not receive the item
.
We are very grateful if you can do that. We will try to resolve the problem as soon as possible.
2.
Due to high volume of daily incoming emails and time zone difference,
we may not be able to reply your emails immediately. we will respond you within 1 Business Day. 3. Working time:
GMT8 (8:30-18:00)
from Monday to Friday.
Out of duty on Saturday and Sunday!
About Us
We has been an
eBay Professional Diagnostic Programmer Seller
for 7 Years.
We are a
Professional Worldwide company.
We are a
Official Authorized dealer
of
Foxwell,
Xhorse,XTOOL,Launch,OBDSTAR,Autel,CGDI,Yanhua,Xtuner,Creater,2M2...
Payment
1.
PayPal
is the online payment method we accept.
Credit card (Visa, Eurocard/MasterCard, Amex, and Switch or Visa/Delta)
payment can be
ALSO
accepted through PayPal (You don't need a PayPal account)!
2. We will send item to your
Confirmed Shipping Address in Paypal
. If you would like to post to other address,please timely leave us a note when making payment through Paypal.We will NOT be responsible for any delivery failure due to unclear, unconfirmed or incomplete addresses given.
3. Please
make payment within 7 days after biding
, or all non-pay bidders will result in a non-paymemt buyer alert from Ebay and
unpaid transaction case will be opend by eBay
.
Shipping
1.Orders will be
shipped out
within 1 business days
after the payment is received(except weekends and holidays).
2. Item will be
shipped by USPS/Fedex
to
your Confirmed shipping address in Paypal
.
If you would like to post to other address , please timely leave us a note when making payment through Paypal. We will NOT be responsible for any delivery failure due to unclear, unconfirmed or incomplete addresses given.
Returns
1. If you are not satisfied with the item you received, pls
return it
within 30 days
for a replacement or money back. please contact us via eBay message at the first time to
get Return Address
instead of sending back directly without permission.
2. If the item you received has quality problem, You can get full refund or exchange a new good item.
If you order a wrong item from us, you can also
return the wrong item to get refund, or exchange a right item
, but the extra shipping cost is your responsibility.
3.
All returned items must be in the
Original Package
and please
Provide the shipping tracking number
, specific reason for the return.
Contact Us
1.
If you have any questions,please contact us
by eBay messages.
Please choose
“ Other”
when
the item you receive is unexpected defective or you did not receive the item
.
We are very grateful if you can do that. We will try to resolve the problem as soon as possible.
2.
Due to high volume of daily incoming emails and time zone difference,
we may not be able to reply your emails immediately. we will respond you within 1 Business Day. 3. Working time:
GMT8 (8:30-18:00)
from Monday to Friday.
Out of duty on Saturday and Sunday!
powered by