miniDSP 8x8 Kit Digital Signal Processor

Description

miniDSP
8xin, 8xout Digital Audio signal processor platform
Highlights
DIY/OEM friendly platform
Configurable by software
Plug-In based configurations
172MHz - 28/56bit DSP
24bit ADC / DAC
48/96kHz sample rate
114dB DR ADC converters
114dB DR DAC converters
Balanced & Unbalanced connectivity on RCA and terminal blocks
I2S In & Out connectivity for miniDIGI/miniAMP boards
Coupon for one free Plug-in download
Product details
miniDSP 8x8 Kit Digital Signal Processor
Note:
This product comes with a coupon (€9,50) for one free miniDSP plugin download.
miniDSP 8x8 kit is an enhanced and innovative platform from the miniDSP Team. Combining high quality audio algorithms, 24bit digital audio, high specs ADC/DAC converters along with its flexible analog and digital sections, this platform follows the footsteps of our successful line of low cost audio processors. With balanced or un-balanced audio for both inputs & outputs, up to 8 channels of active processing can be configured as required thanks to the internal matrix mixer.
Recommended plug-in to be purchased separately
miniDSP 4x10 plug-in / 96kHz processing (Warning not all inputs available under this configuration)
miniDSP 10x10 plug-in / 48kHz processing (inc Comp/lim feature + longer delay)
miniDSP 10x10 Plug-in datasheet
Once a plug-in purchased, the download will automatically become available under your
UserDownloads
section. Please make sure to read the user manual for more details.
What's in the box?
miniDSP 8 x 8 Kit, assembled and tested
All phoenix terminal block for audio inputs/outputs and DC connection
1 x miniUSB cable
1 x 12V universal power supply
1 x miniDSP software coupon
System Diagram
PRODUCT SPECIFICATIONS
Item
Description
Digital Signal Processor Engine
172MHz, 28/56bit Digital Signal Processor
Control
Driverless USB 2.0 control interface for Windows/Mac OS x environments
Audio inputs
Balanced (Phoenix Terminal Block) OR Unbalanced (RCA) inputs
Audio outputs
Balanced (Phoenix Terminal Block) AND Unbalanced (RCA) outputs
ADC/DAC Resolution - Sample rate
24bits bit depth – 48/96kHz sample rate
Dynamic range of ADC/DAC converters
114dB
Maximum Input signal
RCA input: 2Vrms (8 dBu) in unbalanced mode
Phoenix terminal: 4Vrms (14 dBu) unbalanced OR 8Vrms (20dBu) balanced
Maximum Output signal
RCA output: 2Vrms (8 dBu) in unbalanced mode
Phoenix terminal : 4Vrms (14 dBu) unbalanced OR 8Vrms (20dBu) balanced
Dip Switch output control
6dB attenuation available on outputs by Dip Switch control
Infrared Red (I.R) receiver
Front panel I.R. receiver controls volume, mute and preset recall
Expansion Bus
I2S in&out expansion connector compatible with miniDIGI I/O card
USB port
miniUSB port and 5pin standard header for panel mount USB connector
Power supply
Single 12Vdc power supply, 18W power supply - Terminal block connector
Remote IN/OUT
Remote In/Out turns off power of the unit with a delay for car environments
Dimensions (H x W x D) mm
30 x 200 x 250 mm