Refill valve kit for ThermaCell butane cartridges (USA only)

Description

Bottom refill valve kit for Thermacell butane cartridge.
Includes 5 valves, drill bit and epoxy glue.
Fast and easy to install.
This kit will allow you to use standard cans to refill your cartridge - no adapter or modding the tip to fill from the top valve.  Buy the pads in bulk,
and save money on the gas cartridges.
Installing the filling valve to gas cartridge
Find flat surface from the bottom of the cartridge
Drill a hole in the location
Clean the hole and the area around the hole
Mix the epoxy adhesive very well.
Apply glue to the edges of the valve
Press the valve into the hole
Neat hole environment
Wait 24 hours for epoxy to cure.
Fill the cartridge with gas I recommend the multiple times filtered gas
Test the cartridge by immersing it in water.
If you have a favorite bic lighter - you may be able to use this kit to make it refillable.
Note - listing does not include the thermacell cartridge.
Please ask any questions and thank you for looking at my listing.